Amine-containing olefin copolymer with CO2-switchable oil absorption and desorption

Global decrease in crude oil resources and frequent crude oil leaks cause the energy crisis and ecological pollution. The absorption and release of leaked crude oil through absorption materials are a necessary process for environmental protection and recycling. In this article, a CO₂-responsive olefin copolymer was obtained by copolymerization of styrene and an amine-containing olefin monomer. The structure of resultant copolymer was characterized by FTIR; thermal properties and CO₂-responsive morphology changes were determined by DSC/TGA and SEM, respectively. Copolymers had certain absorption capacity for toluene with absorption rate up to 180.0%. The absorbed toluene could be released upon CO₂ stimulation with desorption rate up to 84.6%. The CO₂-responsive copolymer could be regenerated through a simple heating process and showed stable absorption–desorption performance even after being recycled for 4 times. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47439.     

Preparation and polymerization of isopimaric acid derivatives

Isopimaric acid is a typical rosin compound and can account for 30% of the total mass of slash pine rosin. The molecular structure of isopimaric acid derivatives features an unsaturated double bond at the C13 position, opening up the possibility of their industrial polymerization. In this study, isopimaric acid (95.4%), methyl isopimarate (99.5%), and allyl isopimarate (95.1%) were prepared as highly pure monomers. New experimental results are presented and mechanisms based on the investigation of free-radical polymerization under UV irradiation are proposed. New rosin monomers for potential value-added utilization of woody biomass are also identified. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47817.     

电磁搅拌对大圆坯结晶器冶金行为影响的探讨

 为了探究结晶器电磁搅拌(M EMS)对大圆坯结晶器内综合冶金行为的影响。以大断面圆坯连铸结晶器冶金行为为研究对象，基于电磁热流体与凝固传输理论建立三维耦合数值模型。揭示大圆坯连铸常用五孔水口浇注条件下结晶器内电磁场、流场、传热与凝固等综合冶金行为，提出电磁搅拌对结晶器冶金性能影响的多参量评价方法。以中碳铬钼齿轮钢650 mm大圆坯连铸为例，指出结晶器电磁搅拌存在最佳搅拌电流，可获得相对较好的综合冶金效果。具体表现为弯月面保持一定的切向速度和过热度，有利于保护渣的熔化和夹杂物的上浮去除；液面波动幅度在控制范围内，可避免卷渣、改善表面质量；结晶器内钢液过热得到有效耗散，有利于等轴晶形核改善铸坯内部质量；侧孔出流钢液速度得到有效控制，可抑制注流对初凝坯壳的冲刷，提高了初生坯壳生长的均匀性。此外，电磁搅拌产生的水平旋流强度也可得到有效控制，有利于避免常见的皮下白亮带现象。     

Refinement of primary carbides in AISI DC 53 cold work tool steel by thin section copper permanent mould casting and water atomization

In this study, as alternative methods to conventional production methods involving thin section copper permanent mould casting (fast solidification) and water atomization (rapid solidification) of AISI DC 53 cold work tool steel have been investigated. Thin slabs obtained by copper mould casting was homogenized at 1150 °C for one hour and then hot rolling was be applied. After hot rolling, conventional heat treatment have been applied to thin slabs. The same heat treatment procedure have been performed for a commercially available AISI DC 53 which is manufactured by thick section ingot casting and rolling. In order to investigate also the effect of rapid solidification on AISI DC 53 tool steel, steel powder was produced by water atomization technique. Experiments have revealed that thin steel slabs in permanent copper mould and rapidly solidified tool steel powder by water atomization have a more refined primary M₇C₃ carbides than commercially available steel.     

Microstructure and permeability of porous YSZ ceramics fabricated by freeze casting of oil-in-water suspension

Porous yttria-stabilized zirconia (YSZ) ceramics are fabricated through freeze casting of oil-in-water suspension followed by sintering at 1250−1550 °C. The pore structure, compressive strength and permeability of porous YSZ ceramics are tailored via altering the emulsion content and sintering temperature. The samples obtained using higher emulsion content or at lower sintering temperature show larger Darcian and non-Darcian constants due to their higher open porosity and larger pore size. Furthermore, the investigation on individual contributions of viscous and inertial resistances on the total pressure drop during permeation process indicates that the viscous resistance increases but the inertial resistance decreases with increasing the emulsion content or decreasing the sintering temperature for samples. Porous YSZ ceramics obtained in this work with a k₁ range of 3.14 × 10⁻¹³–1.12 × 10⁻¹² m² are appropriate for applications in filters and membrane supports.     

Diffuse reflectance behavior of the printed cotton/nylon blend fabrics treated with zirconium and cerium dioxide and citric acid in near- and short-wave IR radiation spectral ranges

Near- and short-wave IR emission spectra of printed cotton/nylon blend fabrics coated with inorganic compounds in order to tune their diffuse reflectance behavior to the ones with woodland and desert backgrounds are investigated. In this regard, cotton/nylon blend fabrics printed with a four-color digital pattern were used as the substrate, and different concentrations of zirconium and cerium dioxide (ZrO₂ and CeO₂) with and without citric acid as a cross-linker were loaded on these fabrics using the pad-dry-cure method. The diffuse reflectance of the coated fabrics with various concentrations of nanoparticles and a cross-linker was first measured by near-infrared (NIR) diffuse reflectance spectroscopy (DRS). Then, fabrics with an optimum concentration of nanoparticles and appropriate reflectivity profiles similar to woodland and desert were investigated by field emission scanning electron microscopy (FE-SEM), energy-dispersive spectroscopy (EDS), washing, and rubbing fastness properties. In general, NIR and short-wave infrared (SWIR) reflectance of fabrics coated with ZrO₂ and CeO₂ nanoparticles in range of 1% to 1.5% (w/v [%]) was suitable for matching with different environments. According to the findings obtained from the durability test, it was concluded that the washing fastness of the treated fabrics with CeO₂ nanoparticles was excellent in both environments. FE-SEM images of the treated fabrics containing ZrO₂ and CeO₂ indicated that the presence of nanoparticles on the surface of fabrics in woodland patterns was greater than the desert ones. However, the coated fabrics with CeO₂ and citric acid in the woodland pattern have shown better dispersion with a mean particle size of 30 to 60 nm.     

基于迁移学习的有机硅单体分馏过程能耗建模

有机硅单体分馏过程需分离的物质多且分离技术要求高，是有机硅单体生产过程中能耗较高的单元之一。能耗模型的建立对分馏过程的生产优化有着重要的意义。虽然分馏过程中各提纯单元的塔器设备型号、操作条件存在差异，但由于各提纯单元存在相似性，如何充分利用这些相似性进行能耗建模，从而减少建模过程中对数据量、质的要求是要解决的问题。通过引入迁移学习算法，增大源单元和目标单元数据域的相似性，实现不同数据域的知识传递，充分利用现有数据中包含的知识，建立新的能耗模型。以某有机硅企业采集的现场数据进行算法验证，结果显示，当训练样本量不足时，迁移学习可以有效提升模型性能，从而验证了该算法的有效性与实际应用价值。     

Pressureless ultrafast sintering of near-net-shaped superhard isotropic B4C/rGO composites with Ti-Al additives

Superhard composites of B₄C reinforced with randomly-oriented reduced graphene oxide (rGO) nanoplatelets are manufactured by a near-net-shape fabrication route based on three successive steps. Firstly, aqueous colloidal processing is used for the environmentally-friendly preparation of a semi-concentrated multi-component slurry (B₄C as main component, Ti-Al as sintering additive, and rGO as toughening reinforcement), whose suitability for wet shaping is demonstrated by rheological measurements. Secondly, slip casting is used to produce robust green parts with shapes on demand and microstructures free of macro- and micro-defects. And thirdly, pressureless spark-plasma sintering (PSPS) is used for the ultrafast and energy-efficient densification of the green parts with shape retention. Measurements of shrinkage and hardness, as well as the microstructural observations, are used to identify suitable PSPS temperatures leading to obtaining isotropic B₄C/rGO composites that are superhard and almost twice as tough as the monolithic B₄C ceramics.     

脱硫石膏热处理制备注浆成型模具

石灰石-石膏湿法烟气脱硫技术以石灰石为原料吸收烟气中的二氧化硫,得到石膏晶体。在控制二氧化硫排放的同时,脱硫石膏的处理与综合利用也非常重要。以脱硫石膏为原料,分析脱硫石膏的成分,通过热处理使其脱水,并表征热处理过程对石膏物理性能的影响。将热处理后的石膏用于石膏模具的制作,并最终制备固体氧化物燃料电池阳极支撑体。燃料电池测试的结果显示,脱硫石膏可以用于管式固体氧化物燃料电池的制备。     

Hierarchical electromagnetic absorption in micro-waveguide stuffed with magnetic media for resin-based composites of graphene nanosheets and manganese oxides

Waveguide configurations of hierarchical system are proposed as new microstructures for composites in absorbing enhancement. Supercritical fluid (SCF) one-pot exfoliation of layered graphite and manganese oxide mixing materials is developed to obtain a hierarchical system, containing graphene nanosheets (GNS) and exfoliated manganese oxides (EMO) in different sizes. Composites with GNS–EMO embedded in epoxy resin matrix are produced for a design of dielectric and magnetic loss integrated absorber. Volume fraction of GNS–EMO in composites is given for an optimal quantity of resin epoxy in fixation and formation. The effect of mixing ratios between electric and magnetic components is provided for the design of dielectric and magnetic loss integrated absorbers. Frequency shifting phenomena are revealed in the component adjusting course. Excluding the offsetting sizes, reflection loss of composites is enhanced as thickness increases. Synergistic effect of electric and magnetic coordinated materials demonstrates the superiority of micro-waveguide structures in GNS–EMO composite absorber.